LINEVO Foshan Plant · 15,000+ m² · 50+ Patents · Since 2013
CATALOG ID HOOKAH-CORNER-LINEFAMILY LINEVO T05CATEGORY Line Configurations & Specs

Corner-Type 5-Station Pouch, Cartoning & Cellophane Wrapping Line

Designed for square or column-constrained factory rooms where a full linear spine will not fit, this LINEVO T05 corner-type turnkey line arranges five coordinated stations—horizontal pouch packer, weighing/sorting scale, box cartoner, turning transfer, and small-box cellophane wrapper—around a 90-degree footprint.

Check Fit for 90° Corner Cartoning & Overwrap Line Request Itemized Scope & Layout

What It Is Built For vs. When to Choose Another Configuration

Use this rapid application screen to confirm whether 90° Corner Cartoning & Overwrap Line matches your container geometry, product flow behavior, and target throughput before freezing specifications.

RECOMMENDED APPLICATION FIT

Use It For

  • Existing production rooms with limited bay length that still require automated pouching, cartoning, weight sorting, and 3D cellophane wrapping.
  • Clean-zone separation layouts where primary wet/paste pouching sits in one room leg and dry carton/cellophane finishing turns 90° toward shipping.
  • Single-operator U-cell or L-cell staffing where raw pouch film and carton/cellophane magazines sit within a few steps of the inner corner.
  • Dense pastes, shisha blends, and portioned inner packs confirmed via Foshan sample testing.
BETTER SIBLING ARCHITECTURE

When to Choose Another Configuration

Technical Specifications & Operating Conditions

This multi-station or format-specific LINEVO configuration (hookah-corner-line) is dimensioned directly from your physical product sample, container/carton drawings, and production room layout.

Configuration ParameterLINEVO ArchitectureProject Verification Condition
LINEVO Equipment FamilyT05 Corner-Type 5-Station Packaging LineLeft-hand or right-hand 90° layout engineered to room DWG.
Station SequenceHorizontal Packer → Inclined/Turning Transfer → Cartoner → Weight Sorter → Cellophane WrapperStation order and buffer length tailored per room.
Space AdvantageShortens required bay length vs. linear spineSend room L × W × H and doorway dimensions for layout fit.
Application ValidationSample run on client paste/pouch + folding cartonVerifies 90° box/pouch orientation stability prior to shipment.
Realistic Shift OEE Rule: Listed catalog speeds depend on bag/box volume, target fill weight, material flowability, and film seal dwell time. In continuous production, plan net shift output at 0.70–0.85 OEE to account for film splices, carton reloads, and sanitation—and validate your exact SKU during Foshan sample trials.

What Is Included vs. What We Review Per Project

Clear scope boundaries prevent startup surprises between the base machine and project-specific dosing, tooling, and plant interfaces:

BASE CONFIGURATION

Included in Core Machine Scope

  • Horizontal high-speed primary pouch packing machine
  • Weighing / weight-sorting scale module
  • Automatic cartoning machine loading pouches into boxes and folding flaps
  • Small-box transparent cellophane wrapping machine
APPLICATION-ENGINEERED

Reviewed & Specified With Your Quotation

  • 90-degree turning conveyor angle (left-hand vs. right-hand turn) and incline transfer matched to your exact room CAD drawing
  • Wall clearances, column offsets, and operator access aisles around all five stations
  • Site voltage/frequency panel build, batch coding, and sample trial verification

Working Sequence & Shop-Floor Countermeasures

Step-by-Step Operating Cycle

  1. STEP 01Primary pouches are formed, filled, and sealed continuously on the horizontal packing machine along the first leg of the line.
  2. STEP 02An inclined and 90-degree turning conveyor re-orients packs cleanly around the room corner without skewing seal edges.
  3. STEP 03Pouches enter the cartoning machine, which erects folding boxes, inserts each pouch, and closes carton flaps.
  4. STEP 04Filled cartons pass across the weight-sorting scale to reject off-weight boxes before the final station applies a tight transparent cellophane overwrap.

Real Production Floor Failure Modes & LINEVO Countermeasures

Pouches or cartons skewing sideways across an unguided 90-degree corner transfer

Countermeasure: Engineered turning conveyor rails and positive transfer guides maintain consistent pack orientation entering the cartoner and cellophane wrapper.

Line spine colliding with structural building columns or fire-exit aisles

Countermeasure: Custom station spacing and left-or-right 90° corner geometry mapped directly onto your plant's architectural DWG before fabrication.

Empty or double-loaded cartons reaching the cellophane overwrapper

Countermeasure: Downstream weight-sorting station between cartoning and cellophane wrapping Diverts under- or overweight boxes automatically.

Operator walking fatigue along an overly long 20-meter straight packaging line

Countermeasure: Folding the five stations around an L-corner clusters HMI panels, carton magazines, and BOPP film reels around one central operator zone.

Comparing Quotations? Check These 5 Things First

5-Point Buyer Quotation Audit

  1. Speed Test Conditions vs. Shift OEE: Confirm whether quoted bags/boxes per minute reflect dry-cycle empty-film speed or filled product at your exact target weight, and plan net shift output using a realistic 0.70–0.85 OEE factor.
  2. Dosing & Upstream/Downstream Handshake: Verify mechanical chute/conveyor transitions and PLC ready/interlock signals between scales, primary sealers, cartoners, and checkweighers.
  3. Utility Power & Clean Dry Air Split: Match electrical panel build to your exact factory voltage, phase, and frequency (e.g., 220 V single-phase vs. 380 V/480 V 3-phase, 50/60 Hz) and confirm regulated oil-free dry air MPa and m³/min.
  4. Format Tooling for Extra Pack Sizes: Identify which pack dimensions adjust via HMI/handwheels versus which require dedicated forming collars, rotary discs, sealing chucks, or carton molds.
  5. Pre-Shipment Sample & Film FAT Run: Ensure the contract specifies a Foshan Factory Acceptance Test running your physical product samples and printed laminate reels or cartons before balance shipment.

Pre-Dispatch Foshan FAT & Project Sequence

STAGE 01Sample Audit

Bench check of your product flow, piece geometry, and film/carton tolerances in Foshan.

STAGE 02Written Scope Freeze

Signed station list, utility schedule, format tooling table, and 2D CAD floor layout.

STAGE 03Foshan Build

In-house CNC machining, SUS304/316L fabrication, and PLC electrical assembly.

STAGE 04Foshan FAT Run

Live or multi-angle video acceptance run on your actual packaging material before crating.

STAGE 05Crating & Startup

Sea-worthy export cases, bilingual HMI recipes, spare wear kit, and remote/on-site commissioning.

CONTROL CABINET & PNEUMATIC ARCHITECTURE · VERIFIED BOM

Control Cabinet & Pneumatic Hardware BOM

DIN-RAIL & MANIFOLD STANDARD
CAB-PLC · 01
SiemensPLC Motion & Sequence Controller

Main programmable logic controller coordinating dosing, film/pouch indexing, and sealing interlocks.

CAB-ENC · 02
OMRONRotary Encoder, Control Relays & 24V Switching Power Supply

Phase-angle timing feedback, cabinet switching relays, and regulated 24V DC power supply.

CAB-DRV · 03
Delta ElectronicsHMI Color Touchscreen & Variable Frequency Drive (VFD)

Multi-recipe color operator terminal and inverter motor speed control for main drives and conveyors.

CAB-PNU · 04
AirTACPneumatic Cylinders, Solenoid Valves, Vacuum Gauge & FRL Unit

Actuation cylinders, pneumatic manifold valves, vacuum manometer, and air preparation unit.

Representative electrical, sensing, and pneumatic hardware fitted on LINEVO packaging configurations; exact part series or project-specified alternatives are itemized in your written quotation BOM.

Frequently Asked Questions

Can the 90-degree corner turn be built as either a left-hand or right-hand L-layout?

Yes. During layout engineering, LINEVO configures the turning conveyor and operator-side doors/HMIs for either a left-hand or right-hand 90-degree turn to match your room doors, columns, and material flow.

Why is weight sorting placed after cartoning in the corner-line sequence?

Weighing the closed carton immediately before cellophane wrapping confirms both full primary pouch fill weight and proper carton/leaflet presence before sealing the box inside tamper-evident BOPP film.

What room details should we send to get a 2D corner-line CAD drawing?

Provide room length and width, column coordinates, ceiling height, raw material entry and finished pallet exit doors, plus pouch and carton dimensions.

LINEVO FOSHAN TURNKEY DESK

Verify 90° Corner Cartoning & Overwrap Line on Your Actual Samples

Message our Foshan engineering team with your pack dimensions, target fill weight, and shift output goal—no registration forms required.