
What It Is Built For vs. When to Choose Another Configuration
Use this rapid application screen to confirm whether LV-400BF / 680BF / 980BF Stick Pack matches your container geometry, product flow behavior, and target throughput before freezing specifications.
Use It For
- Collagen peptides, protein, probiotics, electrolytes, enzymes, vitamin blends, and medical dispersible powders requiring dust-proof SUS304/SUS316L contact.
- 3-in-1 instant coffee mixes, milk powder, matcha, meal replacements, stevia, and fine sugar in 1–30 g (0.04–1.06 oz) single-serve sticks.
- High-volume co-packers needing 80 to 640 sticks/min (2–16 lanes × 20–40 cuts/min) without lining up ten separate single-lane baggers.
- Turnkey stick-to-carton lines collating counted stick groups into downstream T09 retail folding cartons.
When to Choose Another Configuration
- You are packing larger 50 g–2,500 g retail pillow or gusset bags of granules rather than 1–30 g single-serve powder sticks.
→ Switch to Multihead Weigher VFFS Bagging Line - Your powder product goes into resealable stand-up zipper pouches (W 90–210 mm) or rigid tinplate cans.
→ Switch to LV-210 Premade Pouch Line - You are vacuum-seaming milk powder, infant nutrition, or coffee inside rigid cans at 25–35 cans/min.
→ Switch to LV-135ZFG Automatic Vacuum Can Seamer
Technical Specifications & Operating Conditions
Every value below is grounded in LINEVO's factory catalog for ds-400y (LV-400BF / LV-680BF / LV-980BF), paired with exact arithmetic imperial conversions where millimeter, gram, kilogram, or liter units apply.
| Parameter | Metric Value | Imperial Equivalent | Operating Condition & Engineering Note |
|---|---|---|---|
| Lanes | 2–4 / 3–10 / 4–16 lanes | — | Listed for LV-400BF / LV-680BF / LV-980BF respectively; the number of lanes is selected per project. |
| Listed fill range | 1–30 g | 0.035–1.06 oz | Customizable dosing screw tooling; validate the actual powder density and target dose. |
| Bag length | 50–150 mm | 1.97–5.91 in | Same range for all three models; confirm the forming and cutting configuration. |
| Bag width | 20–65 / 20–85 / 20–105 mm | 0.79–2.56 / 0.79–3.35 / 0.79–4.13 in | Listed for LV-400BF / LV-680BF / LV-980BF respectively; confirm for your product, pack format and utilities in the quotation. Width depends on the selected forming tooling. |
| Maximum film width | 400 / 680 / 980 mm | 15.75 / 26.8 / 38.6 in | Listed for LV-400BF / LV-680BF / LV-980BF respectively; confirm for your product, pack format and utilities in the quotation. |
| Packing speed | 20–40 cuts/min | — | Machine cycles per minute; each cycle cuts one pack in every lane. |
| Voltage | 220 V, 50/60 Hz | — | Same for all three models; confirm utilities for your site in the quotation. |
| Power | 4.5 / 6 / 7.5 kW | — | Listed for LV-400BF / LV-680BF / LV-980BF respectively; confirm for your product, pack format and utilities in the quotation. |
| Machine weight | 500 / 650 / 800 kg | 1,102 / 1,433 / 1,764 lb | Listed for LV-400BF / LV-680BF / LV-980BF respectively; confirm for your product, pack format and utilities in the quotation. Confirm final shipping data. |
| Machine dimensions | 700 × 1375 × 2680 / 1350 × 1600 × 2850 / 1650 × 1800 × 2950 mm | 27.6 × 54.1 × 105.5 / 53.1 × 63.0 × 112.2 / 65.0 × 70.9 × 116.1 in | Listed for LV-400BF / LV-680BF / LV-980BF respectively; confirm for your product, pack format and utilities in the quotation. |
What Is Included vs. What We Review Per Project
Clear scope boundaries prevent startup surprises between the base machine and project-specific dosing, tooling, and plant interfaces:
Included in Core Machine Scope
- Multi-lane rollstock slitting, vertical stick-tube forming, longitudinal fin sealing, and cross-sealing frame
- Multi-lane auger powder dosing head with SUS304 / SUS316L product-contact construction
- Dust-proof easy-clean sanitary enclosure and PLC touchscreen speed/cut control (220 V, 50/60 Hz base rating)
Reviewed & Specified With Your Quotation
- Model frame selection (LV-400BF 2–4 lanes, LV-680BF 3–10 lanes, or LV-980BF 4–16 lanes) and exact stick forming tube width
- Custom auger screw pitch/diameter matched to your powder's bulk density and free-flowing vs. cohesive behavior
- Straight vs. zigzag/easy-tear cut pattern, multi-lane laser/thermal date coder, vacuum powder loader, and carton collator
Working Sequence & Shop-Floor Countermeasures
Step-by-Step Operating Cycle
- STEP 01One wide printed laminate reel (up to 400 mm, 680 mm, or 980 mm) unwinds under tension control and slits precisely into 2 to 16 individual lane ribbons.
- STEP 02Each ribbon wraps around its dedicated stainless forming tube and receives a hermetic longitudinal fin seal.
- STEP 03Individual auger screws inside the dust-enclosed top hopper meter 1–30 g of powder down each tube simultaneously.
- STEP 04Horizontal cross-seal jaws weld and cut 20–40 cycles per minute—producing one finished 50–150 mm stick per lane on every stroke.
Real Production Floor Failure Modes & LINEVO Countermeasures
Countermeasure: Dust-proof auger dosing enclosure and deep-reach tube delivery minimize airborne powder in the seal area across all lanes.
Countermeasure: Precision-machined auger screws matched to your powder's bulk density in Foshan sample trials keep per-lane dosing uniform across the full manifold.
Countermeasure: Published frame heights (2,680 mm on LV-400BF, 2,850 mm on LV-680BF, 2,950 mm on LV-980BF) allow exact overhead feeder clearance verification before order.
Countermeasure: SUS304/SUS316L product-contact parts with smooth, dust-proof easy-to-clean access speed up dry/wet sanitation.
Comparing Quotations? Check These 5 Things First
5-Point Buyer Quotation Audit
- Speed Test Conditions vs. Shift OEE: Confirm whether quoted bags/boxes per minute reflect dry-cycle empty-film speed or filled product at your exact target weight, and plan net shift output using a realistic 0.70–0.85 OEE factor.
- Dosing & Upstream/Downstream Handshake: Verify mechanical chute/conveyor transitions and PLC ready/interlock signals between scales, primary sealers, cartoners, and checkweighers.
- Utility Power & Clean Dry Air Split: Match electrical panel build to your exact factory voltage, phase, and frequency (e.g., 220 V single-phase vs. 380 V/480 V 3-phase, 50/60 Hz) and confirm regulated oil-free dry air MPa and m³/min.
- Format Tooling for Extra Pack Sizes: Identify which pack dimensions adjust via HMI/handwheels versus which require dedicated forming collars, rotary discs, sealing chucks, or carton molds.
- Pre-Shipment Sample & Film FAT Run: Ensure the contract specifies a Foshan Factory Acceptance Test running your physical product samples and printed laminate reels or cartons before balance shipment.
Pre-Dispatch Foshan FAT & Project Sequence
Bench check of your product flow, piece geometry, and film/carton tolerances in Foshan.
Signed station list, utility schedule, format tooling table, and 2D CAD floor layout.
In-house CNC machining, SUS304/316L fabrication, and PLC electrical assembly.
Live or multi-angle video acceptance run on your actual packaging material before crating.
Sea-worthy export cases, bilingual HMI recipes, spare wear kit, and remote/on-site commissioning.
Control Cabinet & Pneumatic Hardware BOM
Main programmable logic controller coordinating dosing, film/pouch indexing, and sealing interlocks.
Phase-angle timing feedback, cabinet switching relays, and regulated 24V DC power supply.
Multi-recipe color operator terminal and inverter motor speed control for main drives and conveyors.
Actuation cylinders, pneumatic manifold valves, vacuum manometer, and air preparation unit.
Representative electrical, sensing, and pneumatic hardware fitted on LINEVO packaging configurations; exact part series or project-specified alternatives are itemized in your written quotation BOM.
Frequently Asked Questions
How do we pick between the LV-400BF, LV-680BF, and LV-980BF models?
Multiply your finished flat web width per stick (roughly 2 × stick width + fin seal) by the number of lanes needed to hit your shift goal at 20–40 cuts/min: up to 400 mm web (2–4 lanes) fits LV-400BF; up to 680 mm (3–10 lanes) fits LV-680BF; up to 980 mm (4–16 lanes) fits LV-980BF.
What does 20–40 cuts/min mean in total sticks per minute?
Each cut cycle seals and severs one stick in every active lane simultaneously. At 30 cuts/min (0.78 shift OEE), a 4-lane LV-400BF yields ~120 sticks/min, an 8-lane LV-680BF yields ~240 sticks/min, and a 16-lane LV-980BF yields ~480 sticks/min.
Can we specify SUS316L contact steel for acidic electrolyte or medical powders?
Yes. Catalog contact options cover both SUS304 and SUS316L stainless steel; state SUS316L in your RFQ brief so hopper, auger screws, and dosing tubes are quoted in 316L.
What are the power and floor-weight differences across the three frames?
LV-400BF draws 4.5 kW (500 kg, 700 × 1375 × 2680 mm), LV-680BF draws 6.0 kW (650 kg, 1350 × 1600 × 2850 mm), and LV-980BF draws 7.5 kW (800 kg, 1650 × 1800 × 2950 mm), all listed at 220 V, 50/60 Hz.