
What It Is Built For vs. When to Choose Another Configuration
Use this rapid application screen to confirm whether Straight-Line Pouch & Cartoning Line matches your container geometry, product flow behavior, and target throughput before freezing specifications.
Use It For
- Dense pastes, molasses-style blends, extruded blocks, and portioned pouches that must move directly into retail folding cartons and cellophane wrap.
- Long, unobstructed packaging bays where a linear end-to-end conveyor spine simplifies forklift pallet staging at raw-film infeed and finished-box discharge.
- Brands requiring automated weight verification between primary horizontal pouching and secondary box closure.
- Turnkey single-vendor projects eliminating speed mismatches between separate poucher, cartoner, and overwrapper suppliers.
When to Choose Another Configuration
- Your packaging room is shorter or obstructed by structural columns and requires a 90-degree L-turn footprint.
→ Switch to 90° Corner Pouch, Cartoning & Cellophane Line - You are filling rigid plastic or glass jars/bottles with screw caps and wrap-around labels instead of inner film pouches.
→ Switch to Automatic Bottle Filling, Capping & Labeling Line - You only need primary stand-up zipper pouches without downstream folding cartons or 3D cellophane wrapping.
→ Switch to LV-210 Premade Pouch Weighing & Filling Line
Technical Specifications & Operating Conditions
This multi-station or format-specific LINEVO configuration (hookah-straight-line) is dimensioned directly from your physical product sample, container/carton drawings, and production room layout.
| Configuration Parameter | LINEVO Architecture | Project Verification Condition |
|---|---|---|
| LINEVO Equipment Family | T05 Turnkey Horizontal Pouch-to-Carton-to-Overwrap Line | Configured to client pouch, carton, and master-pack drawings. |
| Included Core Stations | 4 synchronized core machines (Poucher + Scale + Cartoner + Box Wrapper) | Additional checkweigher, inkjet, and bundle wrapper reviewed per layout. |
| Conveyor Geometry | 180° Straight Inline Spine | Total line length and operator aisle clearances defined on project DWG. |
| Sample Verification | Physical paste / block / pouch material + carton board | Throughput rate and seal dwell confirmed during Foshan sample run. |
What Is Included vs. What We Review Per Project
Clear scope boundaries prevent startup surprises between the base machine and project-specific dosing, tooling, and plant interfaces:
Included in Core Machine Scope
- Horizontal high-speed pouch packing machine for primary inner packs
- Inline weighing scale verifying pouch weight between primary and secondary stages
- Automatic cartoning machine that inserts pouches into boxes and folds/closes carton flaps
- Transparent cellophane wrapping machine for the finished individual boxes
Reviewed & Specified With Your Quotation
- Checkweigher reject gate, multi-grade weight sorting scale, and batch inkjet coding integration
- Large-box bundling cellophane overwrapper for master display packs
- Overall linear room length, conveyor transfer elevation, and site electrical/pneumatic drops confirmed with your product sample
Working Sequence & Shop-Floor Countermeasures
Step-by-Step Operating Cycle
- STEP 01Product is portioned and sealed into primary inner pillow pouches on the horizontal high-speed packing machine.
- STEP 02Filled pouches index across the inline weighing scale so off-weight packs are flagged before consuming carton board.
- STEP 03The automatic cartoning station erects flat carton blanks from its magazine, pushes verified pouches inside, and folds the end flaps shut.
- STEP 04Closed retail boxes transfer straight into the cellophane overwrapper for tight transparent film wrapping (with optional large-box bundle wrapping downstream).
Real Production Floor Failure Modes & LINEVO Countermeasures
Countermeasure: Linear transfer conveyors and speed-graded downstream cartoning/overwrapping stations clear brief film-splice pauses smoothly without crushing pouches.
Countermeasure: Dedicated horizontal pouch forming and dosing geometry matched to paste rheology during pre-FAT sample trials in Foshan.
Countermeasure: Placing the weighing scale ahead of carton insertion catches off-weight primary packs before secondary packaging materials are wasted.
Countermeasure: LINEVO builds, wires, and wet-tests the entire straight-line sequence under one roof in Foshan prior to export crating.
Comparing Quotations? Check These 5 Things First
5-Point Buyer Quotation Audit
- Speed Test Conditions vs. Shift OEE: Confirm whether quoted bags/boxes per minute reflect dry-cycle empty-film speed or filled product at your exact target weight, and plan net shift output using a realistic 0.70–0.85 OEE factor.
- Dosing & Upstream/Downstream Handshake: Verify mechanical chute/conveyor transitions and PLC ready/interlock signals between scales, primary sealers, cartoners, and checkweighers.
- Utility Power & Clean Dry Air Split: Match electrical panel build to your exact factory voltage, phase, and frequency (e.g., 220 V single-phase vs. 380 V/480 V 3-phase, 50/60 Hz) and confirm regulated oil-free dry air MPa and m³/min.
- Format Tooling for Extra Pack Sizes: Identify which pack dimensions adjust via HMI/handwheels versus which require dedicated forming collars, rotary discs, sealing chucks, or carton molds.
- Pre-Shipment Sample & Film FAT Run: Ensure the contract specifies a Foshan Factory Acceptance Test running your physical product samples and printed laminate reels or cartons before balance shipment.
Pre-Dispatch Foshan FAT & Project Sequence
Bench check of your product flow, piece geometry, and film/carton tolerances in Foshan.
Signed station list, utility schedule, format tooling table, and 2D CAD floor layout.
In-house CNC machining, SUS304/316L fabrication, and PLC electrical assembly.
Live or multi-angle video acceptance run on your actual packaging material before crating.
Sea-worthy export cases, bilingual HMI recipes, spare wear kit, and remote/on-site commissioning.
Control Cabinet & Pneumatic Hardware BOM
Main programmable logic controller coordinating dosing, film/pouch indexing, and sealing interlocks.
Phase-angle timing feedback, cabinet switching relays, and regulated 24V DC power supply.
Multi-recipe color operator terminal and inverter motor speed control for main drives and conveyors.
Actuation cylinders, pneumatic manifold valves, vacuum manometer, and air preparation unit.
Representative electrical, sensing, and pneumatic hardware fitted on LINEVO packaging configurations; exact part series or project-specified alternatives are itemized in your written quotation BOM.
Frequently Asked Questions
Why choose a straight-line packaging layout over a 90-degree corner layout?
A straight-line layout eliminates angled turning conveyors so pouches and cartons travel in one continuous orientation, giving one operator clear sightlines across every magazine from raw film to wrapped boxes when hall length permits.
Which stations are standard vs. optional in the straight-line configuration?
The core configuration includes the horizontal high-speed pouch packer, weighing scale, box-folding cartoning machine, and box cellophane wrapper. Additional checkweighing, weight sorting, inkjet coding, and master-bundle cellophane wrapping are reviewed per project.
Can this straight-line architecture handle non-tobacco food pastes or dense blocks?
Yes. Beyond shisha molasses pastes, the horizontal pouch-to-carton-to-cellophane spine adapts to similar dense food pastes, bars, or portioned pouches once confirmed with physical samples at our Foshan lab.